Seaga INF4C - Setting Date and Time

25Revision 2.EL950 1.3.1074C 18.6
DATE/TIME
HEALTH SAFETY
STEP DISPLAY
1 Press Service Mode Buon Motor Count or Error Code **
2 Press 4 for Conguraon Conguraon
3 Press 1 for Date/Time Date/Time
4 Press 1 to change Date MM/DD/YY current seng *-Exit, no change #-Edit Use num-
ber keys to enter new date
5 Press 2 to change Time HH:MM current seng *-Exit, no change #-Edit Use number
keys to enter new me
6 Press 3 to change DST (Daylight
Savings me)
DST ON/OFF *-Exit, no change 3 – Toggle On/O. Press # to
Save
7 Press * two mes to exit to Sales
Mode
0.00
STEP DISPLAY
1 Press Service Mode Buon Motor Count or Error Code **
2 Press 4 for Conguraon Conguraon
3 Press 2 for Health Safety Health Safety
4 Press 1 to change Upper Zone Upper Zone
5 Press 1 to change All Items All Items ON/OFF *-Exit, no change 1- Tog-
gle On/O # to Save
6 Press 2 to change Row Row – Use keypad to select row ON/OFF
*-Exit, no change 2- Toggle On/O # to
Save
7 Press 3 to change one Selecon Selecon – Use keypad to select row ON/
OFF *-Exit, no change 3- Toggle On/O # to
Save
8 Press 2 to change Lower Zone Lower Zone
9 Press 1 to change All Items All Items ON/OFF *-Exit, no change 1- Tog-
gle On/O # to Save
10 Press 2 to change Row Row – Use keypad to select row ON/OFF
*-Exit, no change 1- Toggle On/O
11 Press 3 to change one Selecon Selecon – Use keypad to select row ON/
OFF *-Exit, no change 1- Toggle On/O # to
Save # to Save
12 Press * two mes to exit to Sales Mode 0.00