Seagate BarraCuda Pro - 4.3 Supported ATA commands

Seagate BarraCuda Pro SATA Product Manual, Rev. D 25
4.3 Supported ATA commands
The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands,
refer to the Serial ATA: High Speed Serialized AT Attachment specification. See “S.M.A.R.T. commands” on page 31.for details and
subcommands used in the S.M.A.R.T. implementation.
Table 7 Supported ATA commands
Command name Command code (in hex)
Accessible Max Address Configuration
Get Native Max Address Ext 78
H
/ 0000
H
Set Accessible Max Address Ext 78
H
/ 0001
H
Freeze Accessible Max Address Ext 78
H
/ 0002
H
Check Power Mode E5
H
Download Microcode 92
H
Execute Device Diagnostics 90
H
Flush Cache E7
H
Flush Cache Extended EA
H
Identify Device EC
H
Idle E3
H
Idle Immediate E1
H
NoP 00
H
Read Buffer E4
H
Read Buffer DMA E9
H
Read DMA C8
H
Read DMA Extended 25
H
Read FPDMA Queued 60
H
Read Log DMA Ext 47
H
Read Log Ext 2F
H
Read Multiple C4
H
Read Multiple Extended 29
H
Read Sectors 20
H
Read Sectors Extended 24
H
Read Sectors Without Retries 21
H
Read Verify Sectors 40
H
Read Verify Sectors Extended 42
H
Read Verify Sectors Without Retries 41
H
Receive FPDMA Queued 65
H
Request Sense Data Ext 0B
H
Sanitize Device - Overwrite Ext B4
H
/ 0014
H
Sanitize Device - Freeze Lock Ext B4
H
/ 0020
H
Sanitize Device - Status Ext B4
H
/ 0000
H
Security Disable Password F6
H
Security Erase Prepare F3
H
Security Erase Unit F4
H
Security Freeze F5
H
Security Set Password F1
H