EasyManua.ls Logo

Seagate ST2000VX000 - Formatted Capacity; Default Logical Geometry

Seagate ST2000VX000
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
SV35 Series SATA Product Manual, Rev. B
2.2 Formatted capacity
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
2.2.1 LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1,
where n is the number of guaranteed sectors as defined above.
See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-
bit addressing support of drives with capacities over 137 Gbytes.
2.3 Default logical geometry
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1,
where n is the number of guaranteed sectors as defined above.
Model Formatted capacity* Guaranteed sectors Bytes per sector
ST3500641SV 500 Gbytes 976,773,168 512
ST3250824SV 250 Gbytes 488,397,168 512
ST3160812SV 160 Gbytes 312,581,808 512
Cylinders Read/write heads Sectors per track
16,383 16 63

Table of Contents

Related product manuals