Seagull Models CHEROKEE - Page 27

27
www.seagullmodels.com
2.
2mm.
C/A glue.
3.
1.
2mm.
C/A glue.
2.
C/A glue.
2) Position the plastic parts onto the canopy
and fuselage and apply C/A glue and hold the
plastic parts secure until the glue fully cures.
Please see pictures below.
10mm.
12mm.
8mm.
4.
C/A glue.
50mm.
Epoxy.
1.
1.
2.
3.