OPERATION
MANUAL
Product: Document #: Rev: Page:
SEAKEEPER 6 90403 1 8 of 8
Section 2: SYSTEM OPERATION
If it is necessary to shutoff power to the flywheel motor
and slow the flywheel for any reason, press Seakeeper
On/Off button; the button will turn grey and the stabilize
button will disappear indicating the command has been
accepted. It takes approximately 4+ hours for the speed
to drop to zero rpm.
If it is necessary to stop Seakeeper motion for any
reason press the stabilize button. The stabilize button
will turn grey indicating that the Seakeeper is locked.
Never attempt to work on the Seakeeper until the
flywheel has stopped spinning. In the event that the
brake system has automatically locked the Seakeeper
due to an alarm or failure, no attempt should be made to
bypass the alarm or automatic lock.
!
!
To Next Page
Loading...
