Seakeeper 6 - Gyro Specifications; Key Performance and Physical Specs


OPERATION
MANUAL
Product: Document #: Rev: Page:
SEAKEEPER 6 90403 1 1 of 3
Section 6: GYRO SPECIFICATIONS


Seakeeper 6 Specifications & Summary
Rated RPM 9,700 RPM
Angular Momentum at Rated RPM 6,000 N-M-S
Anti-Rolling Torque at Rated RPM 15,690 N-M
Spool-up Time to Rated Speed 40 minutes (9,700 RPM)
Spool-up Time to Stabilization 24 minutes (7,700 RPM)
Spool-up Power
AC Motor
DC Control
2300 Watts Max
125 Watts
Operating Power
AC Motor (Sea state dependent)
DC Control
1050-2300 Watts
125 Watts
Voltage
AC Input
DC Input
110 VAC @ 25 Amps or 230 VAC @ 20 Amps
(±10%), 50/60 Hz, Single Phase
12 VDC @ 15 Amps
Sea Water Supply to Heat Exchanger
30 LPM (8 GPM) maximum
15 LPM (4 GPM) minimum
Ambient Air Temperature 0˚ - 60˚C (32˚ - 140˚ F)
Weight 395 kg. (870 lbs.) bolt-in installation
Envelope Dimensions
0.765 L x 0.757 W x 0.628 H (meters)
30.1 L x 29.8 W x 24.7 H (inches)
Noise Output
At full operating RPM, steady state noise
measured in the factory at a 1 meter distance
measures 70-75 dBC (sound levels may be
higher during spool-up).


