OPERATION
MANUAL
Product: Document #: Rev: Page:
SEAKEEPER 6 90403 1 1 of 3
Section 4: MAINTENANCE
4.0 MAINTENANCE
The gyro system is designed to require as little maintenance as possible. However, since the
system is comprised of mechanical and electrical components that operate in a marine
environment, some periodic inspections and maintenance are required. Seakeeper
recommends a regular inspection interval and Scheduled Maintenance to keep the gyro running
trouble-free.
If the gyro is installed in a wet space, efforts should be made to keep gyro free of salt residue
from either condensation or direct exposure to salt spray. If exposed, a regular wipe down with
mild soap and water with a rinse will help limit corrosion and keep the gyro assembly in good
cosmetic condition. Refer to Service Bulletin 90106 for details.
The gyro comes standard with sealant and thread locker on applicable fasteners. When
reinstalling all fasteners use thread locker and sealant unless otherwise specified.
4.1 REFERENCES
Service bulletins can be downloaded from the Seakeeper web-site in the technical library
https://seakeeper.com/technical-library/
•90026, Service Bulletin, Gyro Paint Information
•90106, Service Bulletin, Fresh Water Rinse Notice
•90426, Service Bulletin, Seakeeper Scheduled Maintenance Plan – Recreational Line
4.2 PRECAUTIONS
Scheduled maintenance must be performed by a Seakeeper certified
service center to maintain warranty coverage. To locate a service center please
go to https://seakeeper.com/find-us/
Never charge the nitrogen charged accumulators with oxygen or shop air!
To Next Page
Loading...
