Seastar Solutions Optimus 360 User Manual

© 2012 SeaStar Solutions Optimus 360 User’s Manual, Rev. C
1-2
Rinse off the SmartCylinders thoroughly, using only fresh, clean water.
DO NOT rinse the PCM, pumps, actuators, or any other component
of the Optimus system.
DO NOT use acetone, or cleaners containing ammonia, acids, or any
other corrosive ingredients, on any Optimus component. Use only a
damp cloth, or a mild detergent if necessary.
Maintain your Optimus 360 System as directed in Section 11 of this
manual.
Keep our waters clean for all current and future users. Dispose of all
fluids in accordance with your local regulations.
After use
Maintenance
1. WEAR A COAST GUARD-APPROVED PERSONAL FLOTATION
DEVICE (PFD).
2. Attach engine shut-off cord (lanyard) to your pfd.
3. Never allow anyone not familiar with the operation of the vessel
control system to operate the boat at ANY time.
4. Know and adhere to all applicable federal, state, and municipal
laws and regulations that govern boating in your area.
DO NOT OPERATE BOAT IF ANY COMPONENT IS NOT IN PROPER
WORKING CONDITION.
During use
1.0 Safety information (continued)
WARNING

Seastar Solutions Optimus 360 Specifications

General

Brand	Seastar Solutions
Model	Optimus 360
Category	Automobile Electronics
Language	English