Seastar Solutions Optimus 360 User Manual

© 2012 SeaStar Solutions Optimus 360 User’s Manual, Rev. C
7-3
7.3 CANTrak Display Map – All Helms Active
(Normal Steering Mode)
The following diagram shows the progression from the Splash
Screen to the All Helms Active Screen, then illustrates the various
choices available from the All Helms Active screen.
Figure 7-3. CANtrak display map.
* Menu may be deactivated. Contact your dealer.
DISPLAY
MENU
All Helms Active
Settings* – Set steering parameters such as number of turns
and steering effort.
Faults – View active faults.
System Health – View the status of all devices on the network.
Good Warning, but operational Failed ? Not found
Device List – Access product information, such as part
number and serial number, for each device on the network.
Adjust display brightness
Splash Screen
Initial Warning System Check 1 System Check 2 System Check 3
INFO NEXT NEXT
OK
3 SEC INTERVAL
BACK
OK
BACK

Seastar Solutions Optimus 360 Specifications

General

Brand	Seastar Solutions
Model	Optimus 360
Category	Automobile Electronics
Language	English