Seastar Solutions OPTIMUS EPS User Manual

© 2012 SeaStar Solutions Optimus Operations Manual, Rev. D
6-5
6.2.3 Warning Fault Handling
A warning fault is a non-critical system fault which may cause the
steering speed to be reduced.
During a warning fault, the CANtrak will display the same information
as with a danger fault but WARNING will appear across the top of the
screen and the buzzer will sound intermittently (until muted).
The user may choose to exit the Warning screen and return to the
All Helms Active screen by pressing the exit button, in which case
the system will flash a warning icon on the screen as shown in
figure 6-5. This icon will remain in place until the fault is repaired.
If the system recovers from the fault (e.g. if a battery runs low and
is subsequently charged) the warning screen will disappear and the
system will automatically resume normal operation.
In rare cases there may be multiple Warning faults at the same time.
You can view a list of all active warning faults by selecting “Active
Warnings” from the Diagnostics (DIAG) screen.
Figure 6-4. Warning fault screen layout.
Will appear if multiple
faults are active to allow
user to scroll through
User may exit the
Warning screen and
return to run screen
Active Fault
Description Zone
Fault Handling
Instructions Zone
System Status Zone

Seastar Solutions OPTIMUS EPS Specifications

General

Brand	Seastar Solutions
Model	OPTIMUS EPS
Category	Marine Equipment
Language	English