The essentials
››› in Safety instructions on page 81
Retaining the child seat with the “ISOFIX/i-Size”
Fig. 31 ISOFIX/iSize securing rings.
You are obliged to follow the seat manufac-
tur
er's instructions.
●
Remove the protective caps of the “ISO-
FIX/iSize” rings by placing a finger in the
hole and pulling up ››› Fig. 31.
●
Press the child seat onto the “ISOFIX” re-
taining rings until the child seat can be heard
to engage securely. If the child seat is equip-
ped with Top Tether* anchor points, secure it
to the correspondent ring ››› Fig. 32. Observe
the manufacturer's instructions.
●
Pull on both sides of the child seat to en-
sure that it is properly anchored.
Child seats with the “ISOFIX” and Top Tether*
attachment system are available from Techni-
cal Services.
Vehicle i-Size positions
Front passenger seat
Rear side seat Rear central seat
airbag on airbag off
Child restraint system approved under ECE R129 X X i-U X
Valid position for front-facing and rear-
f
ac
ing child restraint systems approved
under ECE R129.
Invalid position for child restraint sys-
tems approved under ECE R129.
i-U
X:
21
To Next Page
Loading...
