Emergencies
glass will vaporise as a result of the heat
gener
ated by the bulb, they will be deposited
on the reflector and will impair its surface.
Change the front bulbs
Dipped be
am headlight
Fig. 102 In the engine compartment: remove
the lid.
Fig. 103 In the engine compartment: dipped
beam headlight.
Follow the steps indicated:
R
ai
se the bonnet.
Move the loops
›››
Fig. 102
1
in the di-
r
ection of
the arrow and remove the cov-
er.
Remove connector
›››
Fig. 103
2
from
the b
u
lb.
Unclip the retainer spring
›››
Fig. 103
3
pressing clockwise and inwards.
Extr
act
the bulb and fit the replacement
so that the lug on the base fits into the
recess on the reflector.
Installation involves all of the above
steps in reverse sequence.
1.
2.
3.
4.
5.
6.
Main beam headlight bulb and turn
signal bulb
Fig. 104 In the engine compartment: remove
the lid.
94
To Next Page
Loading...
