B
Bryan EllisSep 9, 2025
What to do if I get CT configuration error on SEB Security Sensors?
- EEdward FloresSep 9, 2025
Call Col - Seb technical support, describing the circumstances that caused the problem.
To Next PageTo Next PageWhat to do if I get CT configuration error on SEB Security Sensors?
Call Col - Seb technical support, describing the circumstances that caused the problem.
What to do if I get a stack error on SEB RGDAT-A70?
Call Col - Seb technical support, describing the circumstances that caused the problem.
What to do if there is a CPU failure in SEB Security Sensors?
Send the equipment to Col - Seb technical service.
What to do if there is an ADC failure in SEB Security Sensors?
Send the equipment to Col - Seb technical service.
General| Brand | SEB |
|---|---|
| Model | RGDAT-A70 |
| Category | Security Sensors |
| Language | English |
Lists related technical specifications and communication protocols for context.
Essential safety guidelines and warnings for using the RGDAT-A70 device.
Protects against polyphase failures by detecting currents exceeding a set threshold.
Detects ground faults by monitoring earth current against a programmed threshold.
Identifies direction of earth faults in various network configurations using angular sectors.
Signals the presence or absence of line voltage based on phase voltage thresholds.
Monitors residual overvoltage levels and trips if they exceed a set threshold.
Detects and signals overvoltage conditions caused by negative sequence components.
Monitors for undervoltage conditions related to positive sequence voltage.
Supervises voltage transducer operation and signals faults in the measurement chain.
Outputs phase current measurements as a 4-20 mA signal for remote control units.
Specific operational features implemented for customer Endesa's requirements.
Specifies the rated voltage and application range for the device's power supply.
Details the specifications of integrated sensors for voltage and current measurement.
Describes the type, rated voltage, and power consumption of the digital input.
Details the contact type, voltage, current rating, and breaking capability of output relays.
Specifies the measurement range, output format, precision, and response time of the current converter.
Outlines the connector type, baud rate, data bits, and parity for serial communication.
Specifies the operating temperature, relative humidity, and storage temperature limits.
Details the connections for voltage and current signals from sensors via terminal block MA.
Describes the layout and pin numbering for connecting the device to a remote control system.
Explains the adapter usage and RJ45 connector labeling for sensor connections.
Guides through the process of installing and uninstalling the RGDAT_A70 configuration software.
Introduces the software's main interface, including menus, toolbar, and status bar.
Covers saving, opening, and managing configuration data files via the File menu.
Details functions for reading and sending data to/from the RGDAT-A70 device.
Explains how to retrieve configuration, measurements, events, and diagnostics from the device.
Describes how to transfer configuration and clock settings to the RGDAT-A70.
Allows setting operating parameters, functions, and threshold values for the RGDAT-A70.
Provides access to essential commissioning tasks like voltage calibration and diagnostics.
Details the process for updating the RGDAT-A70 device firmware to newer versions.
Configures user interface language and selects the serial port for communication.
Displays information about the RGDAT_A70 software version and copyright.
Covers physical mounting, sensor attachment, and cable connections for the RGDAT-A70.
Adjusts device voltage inputs to match combined sensor transducers for accurate measurements.
Provides solutions for typical problems encountered with the RGDAT-A70 and its software.
Explains the device's internal diagnostic capabilities and how to interpret fault indicators.
Illustrates the electrical connections for the RGDAT-A70 outdoor model and its sensors.
Logs modifications and new features introduced in RGDAT-A70 firmware and software versions.