Seca 222 - 4.2 Mounting the Measuring Rod; Mounting Options

Before you really get started… • 11
English
4.2 Mounting measuring rod
Mounting options The measuring rod must be standing on the floor and
attached precisely vertically to a wall for meaningful
measuring results to be obtained.
The spacer washers supplied allow you to compensate
for protruding walls and attachments (e.g. skirting
boards or cable ducts).
The following illustration shows a variety of options for
attaching the rod with the number of spacer washers
per screw recommended in each case.
max =3.3 cm
max = 5
min = 1
max = 5
min = 1
max =3.3 cm
max = 5
min = 1
min = 1
Option II
Option I
Option III
max =3.3 cm
max = 5
min = 1
min = 1
Option IV