• 41
English
CONTENTS
1. Description of device . . . . . . . . . . .42
1.1 Congratulations! . . . . . . . . . . . .42
1.2 Intended use . . . . . . . . . . . . . .42
2. Safety information. . . . . . . . . . . . . .42
2.1 Basic safety precautions. . . . . .42
2.2 Safety information in this manual . 43
2.3 Handling (rechargeable)
batteries . . . . . . . . . . . . . . . . . .44
3. Overview . . . . . . . . . . . . . . . . . . . .45
3.1 Controls . . . . . . . . . . . . . . . . . .45
3.2 Display elements . . . . . . . . . . .47
3.3 Information on rating plate . . . .47
3.4 Menu structure . . . . . . . . . . . . .48
4. Before you get started … . . . . . . . .49
4.1 Scope of supply . . . . . . . . . . . .49
4.2 Assembling the device . . . . . . .50
Install second column element .50
Installing the head slide. . . . . . .51
Install the third column element.51
Installing the push-in scale . . . .52
4.3 Mounting the device on the wall . 53
Installing the wall brackets . . . .53
Installing the slot bolts. . . . . . . .54
Positioning the device in the
wall brackets. . . . . . . . . . . . . . .55
Installing the foot mat . . . . . . . .55
4.4 Connecting the power supply . .56
4.5 Calibrate head slide . . . . . . . . .56
Automated calibration. . . . . . . .56
Calibrating manually . . . . . . . . .58
5. Operate head slide . . . . . . . . . . . . .59
5.1 Measure height. . . . . . . . . . . . .59
Start measuring height . . . . . . .59
Continuous display of
measured result (Hold) . . . . . . .60
Perform relative measurements
(zero). . . . . . . . . . . . . . . . . . . . .60
Transmit measured results to
wireless receivers . . . . . . . . . . .61
Switch off head slide. . . . . . . . .61
5.2 Additional functions (menu). . . . 62
Navigate within the menu . . . . . 62
Activate acoustic signals (bEEP) . 63
Restore factory settings (rSEt). . 63
Set display backlighting (LCd) . . 64
Switch over length units (Unit). . 65
6. The seca 360° wireless network . . . 66
6.1 Introduction . . . . . . . . . . . . . . . 66
seca wireless groups . . . . . . . .66
Channels . . . . . . . . . . . . . . . . . 67
Detection of devices . . . . . . . . .67
6.2 Operating the device in a
wireless group (menu). . . . . . . . 68
Activate wireless module
(system) . . . . . . . . . . . . . . . . . . 68
Set up wireless group (Lrn) . . . . 68
Activate automatic transmission
(ASend). . . . . . . . . . . . . . . . . . . 70
Select print option (APrt) . . . . . . 71
Set time (Time) . . . . . . . . . . . . . 71
7. Cleaning. . . . . . . . . . . . . . . . . . . . . 72
8. What to do if …? . . . . . . . . . . . . . .72
8.1 Faults and their correction . . . . 72
8.2 Change the batteries of the
head slide. . . . . . . . . . . . . . . . 74
9. Maintenance. . . . . . . . . . . . . . . . . . 75
10. Technical data . . . . . . . . . . . . . . . . 75
11. Accessories . . . . . . . . . . . . . . . . . . 76
12. Disposal. . . . . . . . . . . . . . . . . . . . .76
12.1 Disposal of device . . . . . . . . . 76
12.2 Batteries. . . . . . . . . . . . . . . . .76
13. Warranty . . . . . . . . . . . . . . . . . . . . 77
To Next Page
Loading...
