Seca 264 - 5.2 Additional functions (menu)

62 •
5.2 Additional functions (menu)
Additional functions are available in the device's menu.
This allows you to configure the device to suit your own
needs perfectly.
* The menu item "rF" is described in section
“Operating the device in a wireless group (menu)” on
page 68.
Navigate within the
menu
1. Press the Start key of the head slide.
“----” appears in the display.
2. Hold down the Enter key (send/print) and the
arrow key (hold/zero) simultaneously.
The last menu item selected is shown in the display
(here: “bEEP”).
3. Keep pressing the arrow key (hold/zero) until the
required menu item appears in the display (here:
“LCD” display settings).
4. Confirm your selection with the Enter key (send/
print).
The current setting for the menu item or a submenu
is displayed (here: duration of display backlighting
“dur”).
rF*
CAL
End
LCD
• Short
• Long
• 50 %
• 100%
• off
Duration
Brightness
Yes
No
Auto
….
• on
• off
Beep
Reset
Unit
• cm
• ft:in