Replacement instructions
seca 284/ 285
13.09.2010 /KSP 3 30-34-00-811
I Safety measures
Before starting any work on the scale, first disconnect the power supply (mains and
batteries).
II Safety instructions regarding the prevention of electrostatic charging (ESD
protective measures)
ESD protective measures (electrostatic discharge) must be taken whenever work is
performed on electronic components. Please observe the following precautions so that you
can safely repair the scale:
• Ground yourself using an antistatic wrist strap
• Wear ESD safe shoes
• Wear ESD compatible clothing
• Only carry out the work to be performed in an electrostatic protective area
• Make sure the floor is electrically conductive
• Only use ESD proof tools
To Next Page
Loading...
