Configuration • 89
17-10-07-653-100_01-2020B
To select a device mode, proceed as follows:
1. Press and hold the key (approx. 5 sec.) until the Device mode
menu appears.
The current device mode is displayed.
2. Press the desired device mode.
The function is active.
3. Press the key in the header.
The main screen is displayed.
Calling up/exiting a menu To call up the menu, proceed as follows:
1. Press the key.
The Settings menu is displayed.
2. To exit the menu, press the key.
The main screen is displayed.
NOTE
No menu access is possible in the Basic device mode.
Accessing the PDF version of the
instructions for use (QR code)
You can scan a QR code which can be used to access the PDF version of
these instructions for use and load them e.g. onto your smartphone or tablet
PC.
To scan the QR code, proceed as follows:
1. Press the key.
The Settings menu is displayed.
2. Press the or key until the Manual menu item is displayed.
Service
• Measurement functions:
- Performing a measurement
- Reading off results
- Using additional functions
•Menu:
- Device configuration
- Network configuration
- Additional service functions
Service
Authorized service
technicians
Mode Functions Use Recommended user group
Device mode Function available
Basic –
Advanced •
Expert •
Service •
To Next Page
