Why are only the "SYS" and "lrn" items visible in the rf menu on my Seca Scales?
If only the "SYS" and "lrn" items are visible in the rf menu, the wireless module is activated, but no wireless group is set up. Set up a wireless group (see "Setting up a wireless group (Lrn)" on page 80).
Why are the items "APrt" and "Time" not visible in the rf menu of my Seca 677 Scales?
If the items "APrt" and "Time" are not visible in the rf menu, no wireless printer is registered to the wireless group. Register the wireless printer to the wireless group via the "lrn" menu item (see "Setting up a wireless group (Lrn)" on page 80).
General| Weight | 3.5 kg |
|---|---|
| Display | LCD |
| Capacity | 300 kg |
| Graduation | 100 g |
| Functions | BMI calculation |
| Power supply | Battery operated |
Specifies the intended applications and regulatory compliance of the seca 677 electronic platform scale.
Details the scale's capabilities, including weight and BMI determination, and wireless data transmission.
Defines the required qualifications for personnel involved in assembly and operation of the device.
Explains the meaning of DANGER, WARNING, CAUTION, NOTICE, and NOTE symbols used for hazard communication.
Provides fundamental safety guidelines for handling the instrument, preventing electrical shock, infections, and environmental hazards.
Identifies and explains the function of the scale's various controls and physical components.
Explains symbols displayed on the scale and markings found on the device, rating plate, and packaging.
Details the scale's menu structure for accessing and configuring various functions.
Lists all components included in the seca 677 scale package for initial setup.
Provides step-by-step instructions for assembling the scale, including setting up the railing and display housing.
Details the procedure for connecting the power pack and ensuring a stable power supply for the scale.
Guides users on moving, aligning, and preparing the scale for operation after assembly.
Explains basic weighing, using TARE/HOLD functions, and calculating BMI with patient support guidance.
Covers sending measurement results wirelessly and configuring automatic printing of BMI with compatible devices.
Details menu structure, navigation, customization options, and specific functions like auto-hold, beeps, and filtering.
Explains the seca 360° wireless network, wireless groups, device combinations, and transmission range.
Details channel communication within wireless groups, manual channel selection, and how the scale detects connected devices.
Guides on activating wireless modules, setting up groups, integrating devices, and syncing time for wireless printing.
Provides instructions for cleaning the scale with mild soap and disinfecting sensitive surfaces with appropriate agents.
States the device cannot be sterilized and outlines the procedure for performing a pre-use function check.
Lists common issues like error messages, wireless failures, and display issues with their causes and solutions.
Recommends professional servicing and explains when recalibration is necessary due to damaged seals or counter discrepancies.
Explains how to check the scale's calibration status by comparing the calibration counter with the sticker.
Provides detailed specifications for the scale's dimensions, weight, operating conditions, power, and wireless transmission.
Details weighing parameters including maximum/minimum load, increments, tare range, and accuracy on initial calibration.
Lists available optional accessories and spare parts with their corresponding article numbers.
States the product's compliance with European directives and provides information on where to find the full declaration.
To Next Page
