34
– You can use the arrow keys to adjust
the value in increments according to
the graduations displayed.
– Once the correct value is set, press the
FUNC key again. The pre-Tare function
is now activated.
– Move onto the scale in the wheelchair
associated with that memory. Read the
weighing result off the digital display.
– To return to normal weighing mode,
press the FUNC key.
– To switch off the scale, press the
START key again.
Tip: note weight and the memory in which the weight is stored on your wheel-
chairs.
Setting damping
Damping is useful for reducing weight determination malfunctions (due to patient move-
ments, for example). The stronger the damping, the more slowly the weight display re-
acts. You can set damping to suit requirements.
– Press the FUNC key and keep it de-
pressed for 2 seconds.
FIL and the current setting appear in
the display:
0 = slight damping
⇒ fast determination of weight
1 = average damping
⇒ normal determination of weight
2 = strong damping
⇒ slow determination of weight
– Press an arrow key if you want to
change the set value.
– Press the FUNC key again to store the
displayed value. The scale is then back
in normal weighing mode.
The settings are retained even once the scale is switched off.
To Next Page
Loading...
