28
Turning the display
The display for the scales is mounted fa-
cing the chair. The display can be turned
180° so that either the patient or health
care personnel can view or operate the
display. Turn the display anticlockwise un-
til it is in the desired position.
Correct weighing
– Press the START key.
se(a, 8.8.8.8.8. and 0.0 appear con-
secutively in the display. The scale is
then automatically set to zero and
ready to use.
– If necessary, switch the weight display
(see page 28).
– Stand on the scale and keep still.
– Read the weighing result off the digital
display.
– If a load greater than 300 kg or 660 lbs
is placed on the scale,
St0P appears
in the display.
– To switch off the scale, press the
START key again.
Switching the weight display
The weight display can be switched bet-
ween kilogrammes (kg) and pounds (lbs) or between kilogrammes (kg) and stones
(sts).
– Switch on the scale using the green
START key. Weight is initially dis-
played in the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the
kg/lbs/sts key.
– The kg or lbs display lights up.
–To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
The lbs or sts display lights up.
To Next Page
Loading...
