Before you get started … • 31
4. BEFORE YOU GET STARTED …
4.1 Removing the locking pin
1. Turn the locking pin on the base of the housing a
quarter-turn anticlockwise.
2. Take out the locking pin.
NOTE
Keep the locking pin for transporting the scale
at a later date.
4.2 Removing the transport lock
► Remove the transport lock from the lower section
of the housing.
NOTE:
►Put the transport lock in a safe place for sub-
sequent transport of the scale.
►You can use the transport lock as a wall
spacer (see section “Fitting the wall spacer”).
Open packaging here
Packaging material can be disposed of through recycling
programs
Click!
To Next Page
Loading...
