Seca 959 - English

48 •
English
CONTENTS
1. Full certification . . . . . . . . . . . . . 50
2. Description of device. . . . . . . . . 51
2.1 Congratulations! . . . . . . . . . . . 51
2.2 Intended use. . . . . . . . . . . . . . 51
3. Safety information . . . . . . . . . . . 52
3.1 Basic safety precautions . . . . . 52
3.2 Safety information in this
manual . . . . . . . . . . . . . . . . . . 53
Handling the instrument. . . . . . 52
Use of measured results . . . . . 53
3.3 Handling (rechargeable)
batteries . . . . . . . . . . . . . . . . . 54
4. Overview . . . . . . . . . . . . . . . . . . . 55
4.1 Controls/Features . . . . . . . . . . 55
4.2 Symbols in display . . . . . . . . . 57
4.3 Information on rating plate. . . . 57
4.4 Menu structure . . . . . . . . . . . . 58
5. Before you get started … . . . . . 59
5.1 Scope of delivery, assembled . 59
5.2 Scope of delivery, partially
assembled. . . . . . . . . . . . . . . . 60
5.3 Assembling the instrument . . . 61
Assembling the push handle . . 61
Assembling the display housing. 61
Fastening the weighing cell
cable . . . . . . . . . . . . . . . . . . . . 62
Assembling the seat . . . . . . . . 63
Assembling the armrests . . . . . 63
5.4 Establishing the power supply. 64
Insert the rechargeable battery
block . . . . . . . . . . . . . . . . . . . 64
Connect the power supply unit 65
6. Operation . . . . . . . . . . . . . . . . . . 66
6.1 Aligning the scale . . . . . . . . . . 66
6.2 Weighing. . . . . . . . . . . . . . . . . 66
Switching on the scale. . . . . . . 67
Start weighing . . . . . . . . . . . . . 67
Tare off additional weight
(TARE). . . . . . . . . . . . . . . . . . . 68
Continuous display of measured
result (HOLD) . . . . . . . . . . . . . 69
Determine and evaluate body
mass index (BMI). . . . . . . . . . . 70
Transmit measured results to
a radio receiver . . . . . . . . . . . . 71
Calculate and print out BMI
automatically. . . . . . . . . . . . . . 71
Automatic switchover of
weighing range . . . . . . . . . . . . 71
Switch off scales . . . . . . . . . . . 72
6.3 Additional functions (menu) . . . 72
Navigate in the menu . . . . . . . 73
Clear stored values
automatically (AClr) . . . . . . . . . 73
Permanently store additional
weight (Pt). . . . . . . . . . . . . . . . 74
Activate Autohold function
(Ahold) . . . . . . . . . . . . . . . . . . 74
Activate acoustic signals
(BEEP) . . . . . . . . . . . . . . . . . . 75
Select attenuation (Fil) . . . . . . . 75
Restore factory settings
(RESET) . . . . . . . . . . . . . . . . . 76
7. seca 360° wireless Network . . . 77
7.1 Introduction . . . . . . . . . . . . . . 77
seca wireless groups. . . . . . . . 77
Channels. . . . . . . . . . . . . . . . . 77
Detection of equipment devices 78
7.2 Operate scales in a wireless
group (menu). . . . . . . . . . . . . . 78
Activate wireless module (SYS) 79
Set up wireless group (Lrn) . . . 79
Activate automatic transmission
(ASend). . . . . . . . . . . . . . . . . . 81
Select print option (APrt) . . . . . 81
Set time (Time) . . . . . . . . . . . . 82