Seca 959 - Assembling the Display Housing; Assembling the Instrument; Assembling the Push Handle

Before you get started … • 61
English
5.3 Assembling the instrument
Assembling the push
handle
1. Put the push handle on the pins of the lower frame.
2. Screw the handle to the lower frame (2 x hexagon
screw M6x16 with washer 6.4 mm).
Assembling the display
housing
1. Insert the fastening bolts of the display housing
through the holes in the handle.
2. Screw the display housing to the handle (2 x
hexagon nut M4, self-locking).
1.
2.
2.
1.
2.