3.1.3 Additional components to be included in the water lines 19
3.1.4 Requirements for installation 19
3.2 Installation steps 21
STEP 1 Check the contents of the package 21
STEP 2 Mount the UrSpring 22
STEP 3 Connect the water couplings 24
STEP 4 Prepare the O-rings and filter module 26
STEP 5 Place the filter module 28
STEP 6 Connect the power 29
STEP 7 Rinse the filter membrane 31
4. Maintenance 32
4.1 Maintenance schedule 32
4.2 Maintenance instructions 33
4.2.1 Calibrating the pressure sensors 33
4.2.2 Removing the controller from the valve block 33
4.2.3 Exchanging the pressure sensors 34
4.2.4 Exchanging the solenoid valve 35
4.2.5 Cleaning the solenoid valve 38
4.2.6 Exchanging the flow sensor 39
4.2.7 Cleaning the flow sensor 39
4.3 Spare parts 40
4.3.1 UrSpring spare part sets 40
4.3.2 Single spare parts 41
5. Troubleshooting 42
5.1 Error codes 42
5.2 Support 44
6. Specifications 45
6.1 Dimensions 45
6.2 Operating data 45
6.3 Electrical connection 46
7. Using pipe couplings 47
7.1 Using custom couplings 47
7.2 Using John Guest quick connect couplings 47
8. Storage, transport and disposal 49
8.1 Storage, e.g. Winterization 49
8.2 Transportation 50
8.3 Disposal 50
Page 4/50
To Next Page
Loading...