Sectron EGS5 GPRS JAVA Terminal - Terminal Specifications: PLS8 LTE Series

9
PLS8 LTE Terminal, PLS8 Rel.2.1 LTE Terminal, PLS8 Rel.3 LTE Terminal
GSM – LED is inactive after the device is switched on; function can be set by command
AT^SLED (option cannot be saved)
SIM – SIM card slot
+ - – Power connection terminals 8 – 30 V DC PWR (polarity must
correspond to the engraving)
LED power diode – LED diode that indicates the power status, it lights up green
when the device is turned on
USB – USB connector for connection to computer
GSM – Main antenna for GSM signal reception
GPS – Antenna for GPS reception
DIV – Diversity antenna to improve GSM signal
Name
PLS8 LTE Terminal
PLS8 Rel.2.1 / Rel.3 LTE Terminal
GSM module
Gemalto M2M GmbH - Cinterion
PLS8
Gemalto M2M GmbH - Cinterion
PLS8 Rel.3
Frequency bands GSM
800/900/1800/2100/2600 MHz
800/900/1800/2100/2600 MHz
Communication speed(Mbps)
100/50
100/50
Frequency bands GPS
-
User interface
USB
RS-232 / USB
Operating temperature range
-20
0
C up to +55
0
C
-20
0
C up to +55
0
C
Operating temperature range
-40
0
C up to +85
0
C
-40
0
C up to +85
0
C
Power voltage
8 – 30 V DC
8 – 30 V DC
Power consumption
1 W / 3.5 W (receive / transmit)
1 W / 3.5 W (receive / transmit)
Antenna connector
SMA(f) 50 Ohm
SMA(f) 50 Ohm
Dimensions
25 x 54 x 97 mm
25 x 54 x 97 mm
Mounting
DIN rail 35 mm
DIN rail 35 mm
Weight
98 g
110 g