To copy the same programmes to other days of the week,
please follow the process below
Setting the STANDBY
To exit STANDBY mode, press ENTER TWICE
When you have set
P6 the message 'To
Copy press ENTER'
will appear.
Press '-' or '+' to select the
days you wish to copy the
set programmes. Pressing
ENTER after each day to
confirm
The next
sequential day
will now flash.
When complete press BACK
to return to normal operating
mode
Press ENTER
To programme remaining
days please go to the start of
the process 'Setting the
PROGRAMME'
Press ENTER Twice
The words STANDBY and
Standby Enabled will appear
on the display
Press ENTER
After a short period Standby
Enabled will disappear from
the display
Press '-' or '+' until
STANDBY
appears on the
display
9
To Next Page
Loading...
