HF Series Generators -- RAD Console
Operation
OM- 0279R1
3
1.2 OPTIONS
In addition to the features described above, the Generator can be configured
with the following options:
• Anatomical Programmer (APR) for six patient sizes (three adults and
three children), with pre-programmed anatomical views for automatic
selection. The operator may introduce modifications manually in all the
original APR techniques and store them for later use.
• Automatic Exposure Control (AEC), which accommodates most popular
exposure detectors. A total of up to four detectors (Ionization or Solid
State types) can be installed on the system. Each one can be
independently calibrated.
• Third / Fourth Bucky, this option allows to connect of up to four Buckys
to the Generator.
• Tomography, an adaptation to interface with the Tomo device.
• Second X-ray Tube, which extends the system for using two X-ray
Tubes.
• High Speed Rotor Controller, an optional digital controller consisting of
a module which is fitted within the Power Cabinet.
1.3 PRODUCT IDENTIFICATION
The major items in the Generator have some identification labels attached to
them which provide the following manufacturer and product information.
• Product.
• Model.
• Volts (V), Line Phases, Frequency ( Hz), and Power (kVA, kW).
• Date of manufacture.
• Serial number.
• Reference.
• Manufacturer.
• Place of manufacture
• Certification.
To Next Page
Loading...