76
SIMULATOR MODE
This mode provides you with the ability to practice various
dive mode scenarios and computer functions while
observing the various displays.
• At any time while in Simulator Mode, pressing and hold-
ing both buttons simultaneously for 2 seconds shall
revert operation to real Surface Mode.
• The set points entered into the XP 5 do not affect the
operation of the Simulator which has its own settings
that allow Digital Gauge Mode to be set ON or OFF, cal-
culations to be cleared, and FO2 to be set.
Access and Setup (while in Surface Mode)
• Press and hold Both buttons for 6 seconds.
• Release the buttons during the 2 second window when
the SIM graphic appears (Fig. 73).
• Press and release the Advance (Front) button to
access Simulator Mode. The graphics DEMO and GAUG
will appear with OFF (or ON) flashing (Fig. 74).
When Gauge is set ON, the Simulator will operate as the
unit would in normal User Set Digital Gauge Mode, only dis-
playing Depth, Max Depth, Elapsed Dive Time, and Time of
Day. When set OFF, it operates as it would as an Air or
Nitrox computer.
Fig. 74 - Set Demo Gauge
Fig. 73 - Simulator Mode
To Next Page
Loading...
