Need help?Do you have a question about the Seemann XP5 and is the answer not in the manual?
Details about the Advance and Select buttons for display options and backlight activation.
Explains Nitrogen and Oxygen Bar Graphs and Variable Ascent Rate Indicator for dive status.
Describes various numeric and graphic displays providing essential dive information.
Details warning situations that trigger the audible alarm and its behavior.
Instructions on how to activate the backlight during Surface Mode or a dive.
Procedure to display the computer's serial number and software version.
Information on the battery type, expected life, and indicator status.
Explanation of how to set and use the FO2 (Fraction of Oxygen) mode for Nitrox diving.
Explains the display of critical dive time based on no-decompression and oxygen exposure.
Covers the initial activation process and setting up the dive computer.
Details how to use the Dive Planner to plan dives and avoid limits.
Instructions for protecting and cleaning the dive computer and its components.
Guidelines for annual inspections by an Authorized SEEMANN Dealer to maintain warranty.
Procedures and precautions for replacing the battery in the dive computer.
Explains the dive mode for when no decompression stops are required.
Details the mode entered when decompression stops are necessary.
Describes different modes entered due to exceeding dive limits or procedures.
Covers the dive mode for situations with high partial pressure of oxygen.
Discusses risks and monitoring of high oxygen accumulation during dives.
Explains the mode entered after ascending to the surface.
Details the initial 10 minutes post-dive for surface interval tracking.
Describes access to modes and information for the 2 hours post-transition period.
Allows practice of dive scenarios and computer functions.
Explains the model used for calculating decompression.
Describes how the XP 5 tracks tissue compartments for nitrogen absorption.
Compares XP 5 limits with U.S. Navy limits and provides safety warnings.
Details predicted exposure limits and calculations based on NOAA.
Explains special knowledge and compensation for diving at high altitudes.
Provides guidelines on surface intervals before flying after diving.
Lists the different functions the dive computer can perform.
Details the basis, data, and capabilities of the decompression model.
Lists the available decompression stop ceilings.
States that the algorithm is based on NOAA tables.
States that limits are based on NOAA tables.
Lists all the operational modes of the dive computer.
General| Brand | Seemann |
|---|---|
| Model | XP5 |
| Category | Diving Instrument |
| Language | English |
To Next Page
