82
RESET FEATURE
The XP 5 is configured with a RESET feature that allows
data to be cleared, including Nitrogen and Oxygen calcula-
tions, FO2 set point, Log Mode entries, and Download data.
RESET PROCESS
• While in SURFACE MODE (new activation period or
greater than a 10 minute post dive surface interval),
press the Advance button 1 time to access PLAN MODE.
• While 30 feet (9 meters) is displayed in the PLAN MODE,
press and hold Both buttons until SET 2 appears, then
release the buttons and press the Advance button.
• The Clear screen appears with the first 2 digits of the
Code flashing (Fig.).
If the correct Reset Code (01 01) is not displayed -
• Press and release the Side (Select) button to change the
first 2 digits to 01.
• Press and release the Front (Advance) button to display
the second 2 digits of the Code, flashing.
• Press and release the Side (Select) button to change the
second 2 digits to 01.
• Press and release the Front (Advance) button to
complete the RESET operation and turn the unit OFF.
WARNING:
Reset after a
dive and subsequent
use for a repetitive
dive conducted by
the same diver could
result in serious in-
jury to or death.
Reset Function
To Next Page
Loading...
