EasyManua.ls Logo

Seg WIC1-W3 - Insulation Voltage Withstand; Emc

Seg WIC1-W3
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Manual WIC1 SEG Electronics GmbH
DOK-TD-WIC1E, Rev. M 29
5.7.4 Insulation voltage withstand
Test of withstand alternating voltage for 1 min: IEC 60255-5 2.5 kV
Test of lightning surge voltage 1.2/50 µs, 0.5 J IEC 60255-5 5 kV
5.7.5 EMC
Interference immunity against discharges of static electricity
DIN EN 60255-22-2 [05/97] Air discharge 8 kV
DIN EN 61000-4-2 [03/96] contact discharge 6 kV
Class 3
Interference immunity against high-speed transient interference quantities
DIN IEC 60255-22-4 [10/93] power supply, mains inputs ±4 kV, 2.5 kHz
DIN EN 61000-4-4 [03/96] other inputs and outputs ±2 kV, 5 kHz
Class 4
Interference immunity against 1 MHz burst disturbance tests
DIN EN 60255-22-6 [11/94] differential mode 2.5 kV, 1 MHz
DIN IEC 60255-22-1 [05/91] common mode 1 kV, 2 s
Interference immunity against surge immunity test
DIN EN 61000-6-2 [03/00] 4 kV/2 kV
DIN EN 61000-4-5 [09/96]
Interference immunity against high-frequent electromagnetic fields
DIN EN 61000-4-3 [08/97] 10 V/m
Class 3
Interference immunity against magnetic fields of energy based frequency
DIN EN 61000-4-8 [05/94] continuously 100 A/m
Class 5 3 s 1000 A/m
Interference immunity against line conducted interference quantities induced by high-frequent fields
DIN EN 61000-4-6 [04/97] 10 V/m
Class 3 (0.15-230 MHz)
Interference immunity against surge voltage
DIN EN 61000-4-5 [09/96] within a current circuit 2 kV
Class 4 current circuit to earth 4 kV
Measuring of the radio interference voltage
DIN EN 55011 [10/97] Limit. value class B
Measuring of the radio interference radiation
DIN EN 55011 [10/97] Limit. value class B

Table of Contents

Related product manuals