Seg WIC1-W3 - Flag Indicators

SEG Electronics GmbH Technical Manual WIC1
38 DOK-TD-WIC1E, Rev. M
5.8.3 Flag Indicators
WI1SZ4
Technical Data
Coil: 24V DC 10%
- can be set electrically
- can be reset mechanically
Connector assignment
Coil connection Core color mm² Function
black 0.25 Gnd/Set
black 0.25 Gnd/Set
Cable connection length: 1m
WI1SZ5:
Technical Data
Coil: 24V DC 10%
Contact rating 230V AC/3A
230V DC/0.12A
115V DC/0.2A
24V DC/2A
 Flag indicator with two potential free contacts
 can be set and reset electrically
 can be reset mechanically
Connector assignment:
Coil connection Core color mm² Function
brown 0.25 (-) Gnd
violet 0.25 (+) Set
orange 0.25 (+) Reset
changeover contact 1 white 0.50 NO contact
yellow 0.50 changeover contact
green 0.50 NC contact
changeover contact 2 black 0.50 NO contact
blue 0.50 changeover contact
red 0.50 NC contact
Cable connection length: 1m