8
www.seuservice.com
5. ACCESSORIES
When transporting the machine, make sure that the following parts are supplied.
TABLE 5 ACCESSORIES
KEY MASTER
220-5576 (2)
For opening/closing
the doors
KEY
(2)
For the CASHBOX DOOR
DESCRIPTION OWNERS MANUAL
Part No. (Qty.)
420-6507-05 (1)
Note
Figures
If Part No. has no description, the Number has not been
registered or can not be registered. Such a part may not
be obtainable even if the customer desires to purchase it.
Therefore, ensure that the part is in safekeeping with you.
TAMPERPROOF†WRENCH
M8 540-0009-01 (1)
TOOL
CORD CLAMP
280-5009-01 (1)
Used for securing the
power cord.
see 5 of Section 6.
AC Cable (Power Cord)
600-6724
(1) AC 110V AREA
600-6729
600-6618 (1) AC 220 ~ 240V AREA
Used for installation, see 5 of Section 6.
The Keys are inside the Coin
Chute Door at the time of
shipment from the factory.
VOL CONT B-5K OHM
220-5373
(1)
220-5484
Spare, see Section 10, 11.
JOINT PLATE
DYN-0020 (1)
Used for installation,
see 2 of Section 6.
SW MICRO TYPE
509-5357 (1)
For spare, refer to Section 12.
To Next Page
Loading...
