Sega The House Of The Dead 4 29"STD User Manual

Be very careful when handling the projector screen. The screen is easily damaged but cannot be repaired. If damaged the entire screen must be
replaced.
When carrying out the assembling and installation, follow the following 8-item sequence.
Tools and Implements Required for the Work
1” (24.5mm)
- Phillips screwdriver (for M4 screws)
- Wrench (Spanner) with a jaw width of 1” (24.5 mm)
- Socket wrench set
- Key
- Torx wrench set
1 INSTALLING MONITOR (52”/62”DX)
2 SECURING IN PLACE
3 POWERING ON
4 ASSEMBLY CHECK
8

Sega The House Of The Dead 4 29"STD Specifications

General

Brand	Sega
Model	The House Of The Dead 4 29"STD
Category	Arcade Game Machines
Language	English