Segway InfoKey - Page 10

Installing and Uninstalling the InfoKey Programming Tool 5
Installing (Continued)
7
Click INSTALL to continue.
The window status changes to Installing, then to
Installation Complete.
8
Click NEXT to continue.
The
Please Connect window appears.
NOTE: Select a USB port on the computer that you can dedicate
to the InfoKey programming xture. Once the software is installed,
if you connect the programmer to a different USB port it may not
be recognized.
9
Connect the programming xture as described in the
Connecting the Programming Fixture procedure (p. 7).
When the programming xture is connected, click NEXT
to continue.
The
Completing the InfoKey Programming
Tool Setup Wizard
window appears.
10
Click FINISH to complete the InfoKey Programming Tool
software installation.