Segway InfoKey - InfoKey Speed Settings Conversion Table

Error Message Table 21
InfoKey Speed Settings Conversion Table
InfoKey speed settings are programmed in increments of 0.5 MPH, even when the user’s display is set to KM/H. Use the following
table to see what entered KM/H values will be rounded to and how this equates to the MPH value that will be programmed.
Speed Entered
(KM/H)
Rounded Speed
Displayed (KM/H)
Speed Limit Programmed
into InfoKey (MPH)
6.4 to 7.1 6.4 4.0
7.2 to 7.9 7.2 4.5
8.0 to 8.8 8.0 5.0
8.9 to 9.6 8.9 5.5
9.7 to 10.4 9.7 6.0
10.5 to 11.2 10.5 6.5
11.3 to 12.0 11.3 7. 0
12.1 to 12.8 12.1 7.5
12.9 to 13.6 12.9 8.0
13.7 to 14.4 13.7 8.5
14.5 to 15.2 14.5 9.0
15.3 to 16.0 15.3 9.5
16.1 to 16.8 16.1 10.0
16.9 to 17.6 16.9 10.5
17.7 to 18.4 17.7 11.0
18.5 to 19.2 18.5 11.5
19.3 to 20.0 19.3 12.0
20.1 20.1 12.5