Segway InfoKey - Programming an InfoKey; Logging In

10 Programming an InfoKey
Programming an InfoKey
This section describes how to log in, create a new InfoKey, duplicate an existing InfoKey, change the conguration of an existing
InfoKey, and nd more information.
NOTE: Before continuing, make sure you have a valid user name and password. For more information see the Before You Begin section (p. ii) or contact
Segway Technical Support at 603-222-6150.
Logging In
Complete the following steps to log in to the InfoKey Programming Tool.
1
Double-click the InfoKey Programming
Tool icon.
The system displays the
Login window.
2
Enter your user name. Press TAB or click in the password
eld. The cursor appears in the password eld.
3
Enter your password.
4
Click LOG IN.
If you do not enter the correct user name, an error message
appears. Click CONTINUE to return to the
Login window.
If you do not enter the correct password, a diffferent error
message appears. Click CONTINUE to return to the
Login
window.