Segway InfoKey - Setting Up the Programming Fixture; Connecting the Programming Fixture

Setting Up the Programming Fixture 7
Setting Up the Programming Fixture
The Segway InfoKey Programming Fixture provides the hardware connection required to create and change InfoKey congurations.
The programming xture connects to your computer through a standard USB cable (provided) and does not require any other
power source.
Connecting the Programming Fixture
Complete the following steps to connect the programming xture to your computer.
1
Connect the USB cable type B connector (square) to the
programming xture.
2
Connect the USB cable type A connector (rectangular) to
your computer.
If your computer does not automatically recognize new
hardware, use the Add Hardware program in your Windows
Control Panel to add the programming xture.
NOTE: Your PC’s USB port may not be capable of supplying enough
power to the InfoKey programmer. In this event, you can purchase a
powered USB adapter, or try switching the programmer to another
USB port. If you switch to another USB port, you may be prompted
to search for drivers for the InfoKey programmer hardware. Follow
the on-screen prompts and allow Windows to search the PC for the
appropriate drivers.
TO
PROGRAMMING
FIXTURE
TO
COMPUTER
TO
PROGRAMMING
FIXTURE
TO
COMPUTER