Segway InfoKey - Removing an InfoKey from the Programming Fixture

Setting Up the Programming Fixture 9
1
Position your ngers on the sides of the InfoKey as shown.
Gently press the InfoKey straight down and release. The
InfoKey should pop up slightly and the white light ring will
turn off when the InfoKey is properly released.
2
Rotate the InfoKey counter-clockwise until the yguy logo
aligns with the white dot on the programming xture.
3
Lift the InfoKey straight up and away from the
programming xture.
Complete the
Returning an InfoKey to Service procedure
(p. 2) before using the InfoKey.
Removing an InfoKey from the Programming Fixture
Complete the following steps to remove an InfoKey from the programming xture.