Segway InfoKey - Page 18

Programming an InfoKey 13
5
Insert the InfoKey to be congured into the programming
xture and click CONTINUE.
The system displays the
Writing InfoKey Conguration
window.
When the duplicate InfoKey is ready, the system displays
the
InfoKey has been successfully duplicated window.
6
Click CONTINUE to complete the process.
The system displays the
Create window. From this window
you can continue conguring InfoKeys or click GO BACK to
return to the
Main Menu .
7
Remove the InfoKey from the programming xture.
8
Complete the Returning an InfoKey to Service procedure
(p. 2) before using the InfoKey.
The default view appears on the InfoKey screen.
NOTE: Set the InfoKey’s time as described in the Segway Personal
Transporter (PT) i2, x2 Reference Manual
.
Duplicating an InfoKey (Continued)