Segway InfoKey - Page 20

Programming an InfoKey 15
7
Click APPLY to create the new InfoKey.
The system displays the
Place the New InfoKey in the
xture
window.
8
Insert the InfoKey to be congured into the programming
xture and click CONTINUE.
The system displays the
Writing InfoKey Conguration
window.
When the new InfoKey is ready, the system displays the
InfoKey has been successfully congured window.
9
Click CONTINUE to complete the process.
The system displays the
Create window. From this window
you can continue conguring InfoKeys or click GO BACK
to return to the
Main Menu .
10
Remove the InfoKey from the programming xture.
11
Complete the Returning an InfoKey to Service
procedure (p. 2) before using the InfoKey.
The default view appears on the InfoKey screen.
NOTE: Set the time as described in the Segway Personal Transporter
(PT) i2, x2 Reference Manual
.
Creating a New InfoKey from an ID Card (continued)