Adjust cutting height
Cancel
60mm
55mm
50mm
45mm
40mm
35mm
30mm
How to change the cutting height
The cutting height can be adjusted in Settings >MOWER>Cutting height, the adjustment range is 30-60 mm (1.2-2.4 in), and the
minimum adjustable segment is 5 mm (0.2 in).
By tapping "Edit" you can: add or delete boundary, off-limit island, and channels. You can also fine-tune parts of the map. Tap a
boundary or off-limit island in the map and then tap the edit icon to fine-tune the map. For the definition of boundary, off-limit
island, and channels, see 2.4 Set up the Working Area.
NOTES：
1. The channel leading to the charging station is automatically generated and cannot be deleted.
2. When you delete a boundary, the element associated with the boundary (channel) is also deleted.
3. By tapping Delete you will delete the entire map. You need to create a new map before using the mower.
Rain sensor
If it rains when mowing, the rain sensor will be triggered after receiving a certain amount of rainwater, and the mower will
automatically return to the charging station. After the water on the rain sensor dries, it will automatically resume the mowing task.
Before the water dries, the mower cannot be started via the app or by pressing the buttons on the mower. This is normal and not a
malfunction of the mower. To continue mowing, please wait for the water to dry up and then press MOW and then OK, start via the
app or wait for the next mowing schedule to start.
You can also turn off the rain sensor in Settings>MOWER>Rain sensor. See 4.1 Cleaning for maintenance tips.
NOTES：
For the best mowing results, it is recommended to mow in dry weather. Mowing in the rain can make the grass stick on the
wheel and the mower may slip.
DO NOT mow in bad weather, such as heavy rain, thunderstorms or snow.
How to edit the map
You can edit or delete the entire map in Settings>MOWER>Map management. Make sure your phone is connected to the mower via
Bluetooth.
38
To Next Page
Loading...
