How to turn on Anti-theft
The anti-theft function can precisely locate Navimow and effectively prevent accidents such as mower theft. When moving out of a
designated area, Navimow will sound an alarm and you will receive a notification on the app simultaneously. When Anti-theft is on,
you can set the geofence and check Navimow's location in the map in real time.
BladeHalt
BladeHalt is a sensor that will be triggered when humans
or animals touch it. This is an experimental function and
will not guarantee 100% accuracy. The sensor is off by
default. It will be enabled when the sensor area is touched.
Meanwhile the blades will stop spinning automatically. This
sensor will only work when the blade disc is spinning.
NOTES:
When the mower is performing the edge cutting, the
BladeHalt sensor won't work.
We recommend disabling this feature when mowing for the
first time to ensure normal function because the sensor may
mistake tall or thick grass as a pet or other sensitive object
and stop the blades.
Blade Halt sensor
xxxxx
xxxxx xxxxxxx
How to reset PIN code
In factory settings, the default PIN code: 0000. You can
reset the PIN code in Settings>MOWER>Reset PIN code.
NOTE: It is recommended that you reset the PIN code
after activating your mower.
1 0 6
Conrm
xxxxx x
xxxxx x
Operation steps:
Step 1: Turn on Anti-theft.
Step 2: Tap 'Geofence extension' to configure the distance of the geofence extension, and then tap 'save' to save.
Step 3: Tap 'Find my mower' to check the location of the mower on the map.
NOTES:
1. If Anti-theft is enabled, you need to enter PIN on the mower before powering off the mower.
2. If Anti-theft is accidentally activated, you need to enter PIN on the mower to disable the alarm and end the push notification.
3. Anti-theft is only available with 4G connection.
Anti- theft
Anti- theft alarm
xxxxx
xx
xxxxx
39
To Next Page
Loading...
