How to unbind a mower
Each mower currently only supports binding to one app account. Before unbinding, it cannot be bound to another app account. You
can unbind the mower in the app. When unbinding, you need to verify your identity through email or SMS verification code.
Network setting
You can manage the network used by Navimow on the Network management page. For H800A-VF, H1500A-VF, and H3000A-VF
models, go to Settings > MOWER > Network management to switch between Wi-Fi and 4G networks.
On the Wi-Fi settings page, you can view the currently connected Wi-Fi network or reconnect to the Wi-Fi.
NOTES:
1. Changing Wi-Fi settings requires your phone to be connected to the mower via Bluetooth.
2. Network switching is only available on products manufactured after week 39 2022.
Firmware version
We will update the functions and firmware of Navimow from time to time. In order to better experience the functions of Navimow, it
is recommended that you regularly check and update the firmware to the latest version.
Auto-u pdate
xxxxx
xxx
xxxxx
xxx
xxxxx
xxx
xxxxx
xxx
xxxxx
xxx
Check for u pdates
NOTES:
When activating the device for the first time the firmware will be updated automatically. Once the update is completed, you will
be noticed by the update result. Refer to Update the mower to the latest firmware in 2.3 Charge and Activate the Mower.
When updating the firmware for the device that is not activated for the first time, the conditions below need to be met before
updating.
-The mower is in the charging station.
-The mower is connected to a network and the signal is strong (through 4G or Wi-Fi).
-The battery power is more than 20%.
-There is no mowing task scheduled in the next hour.
If the pop-up window for updating is closed, you can also search for the new firmware in Settings>MOWER>Firmware version to
update the firmware.
40
To Next Page
Loading...
