MAINTENANCE, STORAGE AND TRANSPORTATION
109
REMOVE FRONT PANEL REPAIR COVER
To remove the front repair cover, do as follows:
The front panel maintenance cover is fast removable snap-type
installation, and you only need to lift the front of the maintenance
cover up by hand.
When lifting up the maintenance cover, do not force too much, in
order to avoid the maintenance cover and the upper shelf support
bar collision, damage the spray paint of the maintenance cover.
Coolant adding mouth and fuse box are located under the repair
cover. Please refer to the repair cover folding and unloading
procedure in this section to add cooling aid or replace the fuse.
To Next Page
Loading...
