VEHICLE DEVICE
50
Gear shifter operation
Different operation modes correspond to different gears. After
selecting the gear, check the indicator light on the instrument
panel to ensure that the gear has been switched to the desired
position. See the table below for the tap position description:
NOTICE
You need to step on the brake pedal when you change the gear.
If you change the gear when the engine is in idle speed or the vehicle
is moving, it can cause transmission damage. Please place the
transmission in parking gear and lock the parking brake when nobody
drives the ATV.
L
Low speed
H
High speed
N
Neutral
R
Reverse
P
Parking
To Next Page
Loading...
