MAINTENANCE, STORAGE AND TRANSPORTATION
144
Replace taillight/rear turn light
Procedures for changing taillights:
Remove rear light cover.
1. Unscrew the rear light holder.
2. Turn the bulb that needs to be replaced on the taillight seat
from left to right. When the limit bead at the end of the bulb
gets stuck in the limit slot of the lamp seat, the damaged bulb
can be taken out and replaced with a new bulb with the same
power.
3. Test whether the lamp works normally.
High beam adjustment
The headlight beam can be adjusted slightly up/down. Use the
following procedure to make adjustments.
!
CAUTION
The following pictures are for reference only. Your model may be
slightly different.
It is best to let Segway Powersports dealers adjust if conditions
permit.
To Next Page
Loading...
