MAINTENANCE, STORAGE AND TRANSPORTATION
162
Fuse box replacement
To prevent an accidental short circuit, turn the ignition switch to
the (OFF) position and check or replace the fuse.
To check or replace the circuit fuse, pull out the old fuse with a
puller.
The fuse box cover is equipped with a puller. Using this tool will
help you take out the fuse.
The fuse box cover is fitted with a common fuse which can be
replaced.
1
Puller
2
Spare fuse
NOTICE
If a replacement fuse suitable for the circuit rating is not available,
install a lower rated fuse.
To Next Page
Loading...
