MAINTENANCE, STORAGE AND TRANSPORTATION
151
The exhaust pipe must be cleaned of accumulated carbon
periodically as follows:
1
Bolt M6*16 (3 PC)
2
Muffler spark eliminator
1. Remove 3 pieces of M6*16 bolts.
2. Start the engine and rev it up about 20 times. At the same
time, use a towel to plug the end of the muffler, instantly
generating exhaust system pressure.
3. Allow the engine exhaust pipe to cool.
4. Reinstall the muffler spark eliminator and bolts.
To Next Page
Loading...
